Hydraulic.Hybrid Series

  • Energy saving rate 65 ~ 75% by SERVO HYBRID system
  • Improvement of positioning control by mold open/ close proportional valve
  • Stabilized one injection cylinder design
  • Linear Motion Guide on Injection unit
  • Realization of molding stability by center touching type nozzle touch cylinder
  • Optimization of structure through In-line type injection cylinder and charging motor
  • Special injection unit for high speed injection
  • Variable application by modularized injection unit
  • User friendly interface ECO design
Injection Unit Model 80
Item Unit S A B
Screw Diameter mm 30 36 40
Shot Weight (PS) g 90 129 160
Shot Size cm³ 98 142 175
Injection Pressure kg/cm² 2819 1957 1585
Injection Rate cm³/sec 74 107 132
Screw Stroke mm 140
Plasticizing Capacity kg/hr 33 57 77
Screw Speed rpm 264
Clamping Unit Clamping Force ton 80
Opening Stroke mm 300
Min. Mold Height mm 150
Max. Mold Height mm 460
Max. Mold Weight kg 303
Space between tiebar (H x V) mm 345x345
Platen Size (H x V) mm 500x500
Ejector Force ton 2.75
Ejector Stroke mm 100
General Heater Power kW 6.3
Pump Motor Power kW 11
Total Wattage kW 18.5
Oil Tank Capacity ℓ 145
Machine Size (L x W x H) m 4.25x1.16x1.65
Machine Weight ton 4
Water Requirement ℓ/min 11
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 120
Item Unit S A B
Screw Diameter mm 36 40 45
Shot Weight (PS) g 148 182 231
Shot Size cm³ 162 201 254
Injection Pressure kg/cm² 2511 2034 1607
Injection Rate cm³/sec 105 130 165
Screw Stroke mm 160
Plasticizing Capacity kg/hr 57 77 105
Screw Speed rpm 264
Clamping Unit Clamping Force ton 120
Opening Stroke mm 350
Min. Mold Height mm 170
Max. Mold Height mm 500
Max. Mold Weight kg 475
Space between tiebar (H x V) mm 410x410
Platen Size (H x V) mm 610x610
Ejector Force ton 3.96
Ejector Stroke mm 120
General Heater Power kW 7.3
Pump Motor Power kW 15
Total Wattage kW 23.5
Oil Tank Capacity ℓ 180
Machine Size (L x W x H) m 4.58x1.18x1.64
Machine Weight ton 5
Water Requirement ℓ/min 15
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 170
Item Unit S A B
Screw Diameter mm 40 45 50
Shot Weight (PS) g 205 260 321
Shot Size cm³ 226 286 353
Injection Pressure kg/cm² 2362 1866 1512
Injection Rate cm³/sec 135 171 212
Screw Stroke mm 180
Plasticizing Capacity kg/hr 73 100 128
Screw Speed rpm 252
Clamping Unit Clamping Force ton 170
Opening Stroke mm 440
Min. Mold Height mm 190
Max. Mold Height mm 560
Max. Mold Weight kg 879
Space between tiebar (H x V) mm 520x520
Platen Size (H x V) mm 740x740
Ejector Force ton 3.96
Ejector Stroke mm 140
General Heater Power kW 7.9
Pump Motor Power kW 18.5
Total Wattage kW 27.6
Oil Tank Capacity ℓ 200
Machine Size (L x W x H) m 4.99x1.43x1.78
Machine Weight ton 7
Water Requirement ℓ/min 18.5
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 280
Item Unit S A B
Screw Diameter mm 50 55 60
Shot Weight (PS) g 465 562 669
Shot Size cm³ 511 618 735
Injection Pressure kg/cm² 2835 2343 1969
Injection Rate cm³/sec 209 253 301
Screw Stroke mm 260
Plasticizing Capacity kg/hr 147 178 212
Screw Speed rpm 247
Clamping Unit Clamping Force ton 280
Opening Stroke mm 570
Min. Mold Height mm 250
Max. Mold Height mm 680
Max. Mold Weight kg 1860
Space between tiebar (H x V) mm 620x620
Platen Size (H x V) mm 910x910
Ejector Force ton 8.8
Ejector Stroke mm 170
General Heater Power kW 16.7
Pump Motor Power kW 37.5
Total Wattage kW 54.2
Oil Tank Capacity ℓ 410
Machine Size (L x W x H) m 7.35x1.8x2.15
Machine Weight ton 12
Water Requirement ℓ/min 37.5
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 330
Item Unit S A B
Screw Diameter mm 55 60 65
Shot Weight (PS) g 649 772 906
Shot Size cm³ 713 848 995
Injection Pressure kg/cm² 2407 2022 1723
Injection Rate cm³/sec 285 339 398
Screw Stroke mm 300
Plasticizing Capacity kg/hr 153 182 213
Screw Speed rpm 200
Clamping Unit Clamping Force ton 330
Opening Stroke mm 700
Min. Mold Height mm 300
Max. Mold Height mm 750
Max. Mold Weight kg 2800
Space between tiebar (H x V) mm 720x720
Platen Size (H x V) mm 1100x1100
Ejector Force ton 11
Ejector Stroke mm 200
General Heater Power kW 15.2
Pump Motor Power kW 45
Total Wattage kW 60.2
Oil Tank Capacity ℓ 470
Machine Size (L x W x H) m 8.02x1.97x2.31
Machine Weight ton 16
Water Requirement ℓ/min 45
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 480
Item Unit S A B
Screw Diameter mm 70 75 85
Shot Weight (PS) g 1261 1447 1859
Shot Size cm³ 1385 1590 2043
Injection Pressure kg/cm² 2071 1804 1405
Injection Rate cm³/sec 476 546 702
Screw Stroke mm 360
Plasticizing Capacity kg/hr 261 300 385
Screw Speed rpm 158
Clamping Unit Clamping Force ton 480
Opening Stroke mm 750
Min. Mold Height mm 350
Max. Mold Height mm 800
Max. Mold Weight kg 4126
Space between tiebar (H x V) mm 850x850
Platen Size (H x V) mm 1250x1250
Ejector Force ton 13.7
Ejector Stroke mm 200
General Heater Power kW 25
Pump Motor Power kW 64
Total Wattage kW 89
Oil Tank Capacity ℓ 680
Machine Size (L x W x H) m 9.6x2.2x2.5
Machine Weight ton 30
Water Requirement ℓ/min 64
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 580
Item Unit S A B
Screw Diameter mm 75 85 90
Shot Weight (PS) g 1769 2272 2547
Shot Size cm³ 1944 2497 2799
Injection Pressure kg/cm² 2224 1732 1545
Injection Rate cm³/sec 524 674 755
Screw Stroke mm 440
Plasticizing Capacity kg/hr 293 376 421
Screw Speed rpm 155
Clamping Unit Clamping Force ton 580
Opening Stroke mm 850
Min. Mold Height mm 400
Max. Mold Height mm 950
Max. Mold Weight kg 5700
Space between tiebar (H x V) mm 920x920
Platen Size (H x V) mm 1350x1350
Ejector Force ton 17
Ejector Stroke mm 200
General Heater Power kW 30.1
Pump Motor Power kW 75
Total Wattage kW 105.1
Oil Tank Capacity ℓ 800
Machine Size (L x W x H) m 10.2x2.2x2.5
Machine Weight ton 35
Water Requirement ℓ/min 75
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
  • Weight 20% reduction by hollow casting design of moving and fixing plate
  • Optimization of part design by Solid works 3D design
  • Cycle time reduction by high speed mold open/ close
  • Reduction of locking time by double lock cylinder
  • Energy saving rate 65 ~ 75% by SERVO HYBRID system
  • LM guide on injection unit
Injection Unit Model 700 900 1100
Item Unit A B A B A B
Screw Diameter mm 90 100 105 115 110 120
Shot Weight (PS) g 2778 3430 4333 5198 4756 5661
Shot Size cm³ 3053 3769 4762 5712 5227 6220
Injection Pressure kg/㎠ 1863 1509 1689 1408 1779 1495
Injection Rate cm³/sec 720 889 898 1077 980 1167
Screw Stroke mm 480 550 550
Plasticizing Capacity kg/hr 355 438 490 588 674 802
Screw Speed rpm 156 151 159
Clamping Unit Clamping System type 2 PLATE D.LC
Clamping Force ton 700/27 900/43 1100/43
Opening Stroke mm 1000/1600 1250/2000 2100/1400
Min. Mold Height mm 500 550 600
Max. Mold Height mm 1100 1300 1300
Max. Mold Weight kg 7530 11403 17170
Space between tiebar
(H x V)		 mm 1015x1015 1120x1120 1420x1300
Platen Size (H x V) mm 1495x1495 1630x1630 2000x1850
Ejector Force ton 21 26 26
Ejector Stroke mm 250 250 250
General
※HYBRID
Green color		 Heater Power kW 41.5 49 55
Pump Motor Power kW 97.5 117.5 117.5
Total Wattage kW 140.2 167.7 172.5
Oil Tank Capacity ℓ 920 1040 1200
Machine Size (L x W x H) mm 8980x3115x2500 10250x3180x2530 10980x3470x2690
Machine Weight ton 30 42 50
Water Requirement ℓ/min 100 110 110
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
  • Energy saving rate 65 ~ 75% by SERVO HYBRID system
  • 2 color 2 components injection molding
  • Reduction of additional treatment and assembly process, optimization of welding and printing process
  • Excellent durability better than printing process by 2 material molding
  • Improvement of repeatability for rotational table by servo motor
Injection Unit Model 130 TC
Item Unit A B
Screw Diameter mm 25 28
Shot Weight (PS) g 62.5 78.4
Shot Size cm³ 68.7 86.2
Injection Pressure kg/cm² 3648 2908
Injection Rate cm³/sec 87 109
Screw Stroke mm 140 140
Plasticizing Capacity kg/hr 24 34
Screw Speed rpm 289 289
Clamping Unit Clamping system type Double direct cylinder
Clamping Force ton 130
Opening Stroke mm 330/460
Min. Mold Height mm 170
Max. Mold Height mm 300
Max. Mold Weight kg 500 [A:250, B:250]
Daylight mm 630
Space between tiebar (H x V) mm 690x290
Platen Size (H x V) mm 910x510
Rotary Table Size mm ⌀750
Ejector Force ton 2.8
Ejector Stroke mm 110
General
※HYBRID
Green color		 Heater Power kW 18.2
Pump Motor Power kW 40.5[37]
Total Wattage kW 63.9[60.4]
Oil Tank Capacity ℓ 510[670]
Machine Size (L x W x H) mm 4903x1494x1910
Machine Weight ton 8
Water Requirement ℓ/min 74
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
  • Practicability and availability : Moveable and controllable up & down (Min. 1385mm, Max. 1635mm)
  • Economic cost comparing with buying new multi components injection machine
  • Minimization of space : Installation on the mold area directly
  • Easy installation, easy operating
  • Convenient option application : Available for customer’s order (Horizontal, vertical type)
  • All electric type : ECO friendly machine which is excellent for energy saving and repeatability by Closed-Loop & Motion control
Item Unit Spec
Injection Unit Screw Diameter mm 30
Shot Weight (PS) g 90
Shot Size cm³ 99
Injection Pressure kg/cm² 2000
Injection Rate cm³/sec 141
Plasticizing Capacity kg/hr 38
Screw Speed rpm 300
Injection Speed mm/sec 200
Injection power ton 14.2
Nozzle Unit Nozzle Touch Force ton 3.6
Nozzle Stroke mm 200
General Heater Power kW 8
Servo
Motor
Power		 Injection kW 25
Charging kW 10
Injection Unit kW 5
Total Wattage kW 48
Machine Size (L x W x H) m 2.4x1.3x2.0
Machine Weight ton 2
Water Requirement ℓ/min 10
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
  • Saving of electric power consumption (65 ~ 75%) by using Servo Hybrid system.
  • Improvement of molding performance by Servo Hybrid system
    • High reproducibility 0.2%
    • High responsibility 30ms
    • High precision control 0.5bar
  • Compact clamping unit for precise molding.
    • LM guide on clamping unit.
    • Minimization of plate deformation by 4 direct clamping cylinders
    • Realization of compact design by optimized structure
    • Realization of simplification of parts by using clamping cylinders with tiebar
  • Injection unit for high speed and thin wall molding
    • High speed injection (350mm/s)
    • Realization of high precision molding by injection servo valve
    • Maximization of molding repeatability by plunger type injection and separate plasticizing device
    • Direct connection between servo valve and actuators
  • Secure the stable driving performance by casting frame unit.
  • Outstanding repeatability and manipulability by IMPACT™ Closed-Loop & Motion control through high precision position / pressure sensor.
  • Double toggle design which can be maintained clamping force mechanically.
  • Exclusive special screw/ barrel for various plastic resin.
  • Beautiful machine design which is considered operator’s convenience and safety.
  • Various exclusive options to meet customer’s needs. (ACC, Injection/ clamping servo control, etc)
  • Excellent stable molding by center press type plate which designed by ANSYS structure analysis.
Injection Unit Model 25
Item Unit A B
Screw Diameter mm 22 25
Shot Weight (PS) g 29 38
Shot Size cm³ 32 42
Injection Pressure kg/cm² 3008 2330
Injection Rate cm³/sec 35 45
Screw Stroke mm 85
Plasticizing Capacity kg/hr 27 39
Screw Speed rpm 0~440
Clamping Unit
(Double toggle)		 Clamping Force ton 25
Opening Stroke mm 210
Min. Mold Height mm 80
Max. Mold Height mm 250
Max. Mold Weight kg 125
Space between tiebar (H x V) mm 255x225
Platen Size (H x V) mm 395x365
Ejector Force ton 1.8
Ejector Stroke mm 40
General
※HYBRID
Green color		 Heater Power kW 2.1
Pump Motor Power kW 9.5[5.5]
Total Wattage kW 12.8[8.8]
Oil Tank Capacity ℓ 90[195]
Machine Size (L x W x H) mm 3000x970x1600
Machine Weight ton 1.7
Water Requirement ℓ/min 9.5[20]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 50
Item Unit S A B
Screw Diameter mm 25 28 30
Shot Weight (PS) g 54 67 77
Shot Size cm³ 59 74 85
Injection Pressure kg/cm² 2509 2000 1742
Injection Rate cm³/sec 51 64 74
Screw Stroke mm 120
Plasticizing Capacity kg/hr 23 36 39
Screw Speed rpm 0~281
Clamping Unit
(Double toggle)		 Clamping Force ton 50
Opening Stroke mm 250
Min. Mold Height mm 100
Max. Mold Height mm 340
Max. Mold Weight kg 220
Space between tiebar (H x V) mm 315x315
Platen Size (H x V) mm 450x450
Ejector Force ton 2.7
Ejector Stroke mm 70
General
※HYBRID
Green color		 Heater Power kW 5.1
Pump Motor Power kW 9.5[11]
Total Wattage kW 15.8[17.3]
Oil Tank Capacity ℓ 145[220]
Machine Size (L x W x H) mm 4038x1251x1524
[4038x1359x1524]
Machine Weight ton 2.9
Water Requirement ℓ/min 9.5[30]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 80
Item Unit S A B
Screw Diameter mm 30 36 40
Shot Weight (PS) g 77 111 137
Shot Size cm³ 85 122 151
Injection Pressure kg/cm² 2652 1842 1492
Injection Rate cm³/sec 63 91 112
Screw Stroke mm 120
Plasticizing Capacity kg/hr 29 50 67
Screw Speed rpm 0~231
Clamping Unit
(Double toggle)		 Clamping Force ton 80
Opening Stroke mm 300
Min. Mold Height mm 150
Max. Mold Height mm 360
Max. Mold Weight kg 300
Space between tiebar (H x V) mm 345x345
Platen Size (H x V) mm 500x500
Ejector Force ton 2.7
Ejector Stroke mm 100
General
※HYBRID
Green color		 Heater Power kW 6.7
Pump Motor Power kW 11[15]
Total Wattage kW 18.9[22.9]
Oil Tank Capacity ℓ 145[220]
Machine Size (L x W x H) mm 4277x1221x1512
[4277x1327x1512]
Machine Weight ton 4.0
Water Requirement ℓ/min 11[30]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 120
Item Unit S A B
Screw Diameter mm 36 40 45
Shot Weight (PS) g 148 183 232
Shot Size cm³ 163 201 254
Injection Pressure kg/cm² 2458 1991 1573
Injection Rate cm³/sec 86 106 135
Screw Stroke mm 160
Plasticizing Capacity kg/hr 45 60 81
Screw Speed rpm 0~204
Clamping Unit
(Double toggle)		 Clamping Force ton 120
Opening Stroke mm 350
Min. Mold Height mm 170
Max. Mold Height mm 400
Max. Mold Weight kg 480
Space between tiebar (H x V) mm 410x410
Platen Size (H x V) mm 610x610
Ejector Force ton 4.0
Ejector Stroke mm 120
General
※HYBRID
Green color		 Heater Power kW 7.3
Pump Motor Power kW 15[18.5]
Total Wattage kW 23.5[27]
Oil Tank Capacity ℓ 185[300]
Machine Size (L x W x H) mm 4780x1356x1625
[4780x1444x1625]
Machine Weight ton 5.0
Water Requirement ℓ/min 15[38]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • • Shot weight = Shot size x material constant
  • • Total wattage = Heater power + pump motor power + system power.
  • • Water requirement is not considered mold cooling but considered only injection molding machine.
  • • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 170
Item Unit S A B C
Screw Diameter mm 40 45 50 55
Shot Weight (PS) g 252 318 393 476
Shot Size cm³ 276 350 432 523
Injection Pressure kg/cm² 2428 1919 1554 1284
Injection Rate cm³/sec 106 134 165 199
Screw Stroke mm 220
Plasticizing Capacity kg/hr 58 79 100 134
Screw Speed rpm 0~198
Clamping Unit
(Double toggle)		 Clamping Force ton 170
Opening Stroke mm 440
Min. Mold Height mm 190
Max. Mold Height mm 460
Max. Mold Weight kg 800
Space between tiebar (H x V) mm 520x520
Platen Size (H x V) mm 740x740
Ejector Force ton 4.0
Ejector Stroke mm 140
General
※HYBRID
Green color		 Heater Power kW 7.9
Pump Motor Power kW 18.5[22]
Total Wattage kW 27.6[31.1]
Oil Tank Capacity ℓ 220[350]
Machine Size (L x W x H) mm 5129x1450x1782
[5129x1558x1782]
Machine Weight ton 7.0
Water Requirement ℓ/min 18.5[44]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 220
Item Unit S A B C
Screw Diameter mm 50 55 60 68
Shot Weight (PS) g 447 541 643 826
Shot Size cm³ 491 593 706 907
Injection Pressure kg/cm² 2218 1833 1540 1198
Injection Rate cm³/sec 187 226 269 346
Screw Stroke mm 250
Plasticizing Capacity kg/hr 112 145 183 242
Screw Speed rpm 0~213
Clamping Unit
(Double toggle)		 Clamping Force ton 220
Opening Stroke mm 520
Min. Mold Height mm 230
Max. Mold Height mm 550
Max. Mold Weight kg 1100
Space between tiebar (H x V) mm 560x490
Platen Size (H x V) mm 830x760
Ejector Force ton 7.03
Ejector Stroke mm 130
General
※HYBRID
Green color		 Heater Power kW 12.1
Pump Motor Power kW 26[37]
Total Wattage kW 39.3[50.3]
Oil Tank Capacity ℓ 360[500]
Machine Size (L x W x H) mm 6777x1565x1962
[6459x1565x1962]
Machine Weight ton 11
Water Requirement ℓ/min 26[74]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 300
Item Unit S A B C
Screw Diameter mm 60 67 70 80
Shot Weight (PS) g 720 898 981 1281
Shot Size cm³ 792 987 1077 1407
Injection Pressure kg/cm² 2083 1670 1530 1171
Injection Rate cm³/sec 300 375 409 535
Screw Stroke mm 280
Plasticizing Capacity kg/hr 172 221 249 343
Screw Speed rpm 0~201
Clamping Unit
(Double toggle)		 Clamping Force ton 300
Opening Stroke mm 590
Min. Mold Height mm 300
Max. Mold Height mm 680
Max. Mold Weight kg 1900
Space between tiebar (H x V) mm 685x580
Platen Size (H x V) mm 995x890
Ejector Force ton 11
Ejector Stroke mm 150
General
※HYBRID
Green color		 Heater Power kW 15.2
Pump Motor Power kW 45[55]
Total Wattage kW 61.4[71.4]
Oil Tank Capacity ℓ 540[810]
Machine Size (L x W x H) mm 7832x1755x2072
[7541x1755x2072]
Machine Weight ton 15.2
Water Requirement ℓ/min 45[110]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 380
Item Unit S A B
Screw Diameter mm 65 70 75
Shot Weight (PS) g 906 1051 1206
Shot Size cm³ 995 1155 1325
Injection Pressure kg/cm² 2237 1929 1680
Injection Rate cm³/sec 308 358 410
Screw Stroke mm 300
Plasticizing Capacity kg/hr 189 226 266
Screw Speed rpm 0~183
Clamping Unit
(Double toggle)		 Clamping Force ton 380
Opening Stroke mm 700
Min. Mold Height mm 300
Max. Mold Height mm 750
Max. Mold Weight kg 2500
Space between tiebar (H x V) mm 710x710
Platen Size (H x V) mm 1020x1020
Ejector Force ton 10.6
Ejector Stroke mm 200
General
※HYBRID
Green color		 Heater Power kW 23.5
Pump Motor Power kW 45[45]
Total Wattage kW 69.7[69.7]
Oil Tank Capacity ℓ 540[740]
Machine Size (L x W x H) mm 7685x1989x1982
[7600x1989x1982]
Machine Weight ton 14
Water Requirement ℓ/min 45[90]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 450
Item Unit S A B C
Screw Diameter mm 80 85 90 100
Shot Weight (PS) g 1464 1652 1853 2287
Shot Size cm³ 1608 1815 2035 2513
Injection Pressure kg/cm² 1971 1746 1557 1262
Injection Rate cm³/sec 376 425 477 588
Screw Stroke mm 320
Plasticizing Capacity kg/hr 232 269 310 401
Screw Speed rpm 0~136
Clamping Unit
(Double toggle)		 Clamping Force ton 450
Opening Stroke mm 680
Min. Mold Height mm 350
Max. Mold Height mm 750
Max. Mold Weight kg 3100
Space between tiebar (H x V) mm 790x740
Platen Size (H x V) mm 1150x1100
Ejector Force ton 17.2
Ejector Stroke mm 180
General
※HYBRID
Green color		 Heater Power kW 25
Pump Motor Power kW 45[67]
Total Wattage kW 71.2[93.2]
Oil Tank Capacity ℓ 640[950]
Machine Size (L x W x H) mm 8931x2036x2306
[8744x2036x2306]
Machine Weight ton 24.5
Water Requirement ℓ/min 45[134]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 550
Item Unit S A B C
Screw Diameter mm 85 90 95 100
Shot Weight (PS) g 1880 2107 2348 2602
Shot Size cm³ 2066 2316 2580 2859
Injection Pressure kg/cm² 1914 1707 1533 1383
Injection Rate cm³/sec 447 501 559 619
Screw Stroke mm 364
Plasticizing Capacity kg/hr 204 234 268 304
Screw Speed rpm 0~102
Clamping Unit
(Double toggle)		 Clamping Force ton 550
Opening Stroke mm 770
Min. Mold Height mm 420
Max. Mold Height mm 880
Max. Mold Weight kg 4200
Space between tiebar (H x V) mm 900x760
Platen Size (H x V) mm 1300x1160
Ejector Force ton 17.2
Ejector Stroke mm 182
General
※HYBRID
Green color		 Heater Power kW 30
Pump Motor Power kW 55[75]
Total Wattage kW 86.2[106.2]
Oil Tank Capacity ℓ 735[1100]
Machine Size (L x W x H) mm 9465x2125x2386
[9269x2125x2386]
Machine Weight ton 30
Water Requirement ℓ/min 55[150]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
  • 20 ~ 25% REDUCTION IN FLOOR SPACE

    The compact design of the clamping system reduces the footprint by 20% ~ 25%, compared to toggle machines.
  • REDUCTION OF HYDRAULIC OIL FLOW BY 25%
  • The special mold-locking cylinder reduce the amount of hydraulic oil circulating in the machine by 25%.
  • MINIMIZATION OF PLATEN DEFLECTION ALLOWS FOR ULTRA-PRECISION MOLDING
  • The special clamp design concentrates the clamping force at the center of the mold, thus minimizing platen deflection.
  • ADJUSTMENT AND DIE HEIGHT ADJUSTMENT
  • The die height and mold clamping force can be set easily and quickly via keyboard.
  • INCREASED MOLD THICKNESS AND MOLD OPEN STROKE
  • The PD Series machines can accommodate thicker molds with a longer mold opening stroke.
  • CENTER PRESS DESIGN PLATEN
  • Superior for stable molding by using center press platen which designed based on Ansys structure analysis.
Injection Unit Model 650
Item Unit A B
Screw Diameter mm 90 100
Shot Weight (PS) g 2489 3073
Shot Size cm³ 2735 3377
Injection Pressure kg/cm² 1909 1547
Injection Rate cm³/sec 589 727
Screw Stroke mm 430
Plasticizing Capacity kg/hr 264 341
Screw Speed rpm 124
Clamping Unit
(2PLATE)		 Clamping Force ton 650/33
Opening Stroke mm 1000/1600
Min. Mold Height mm 500
Max. Mold Height mm 1100
Max. Mold Weight kg 7300
Space between tiebar (H x V) mm 970x970
Platen Size (H x V) mm 1440x1440
Ejector Force ton 21
Ejector Stroke mm 200
General
※HYBRID
Green color		 Heater Power kW 42.5
Pump Motor Power kW 82.5[85]
Total Wattage kW 126.5[128.7]
Oil Tank Capacity ℓ 765[1260]
Machine Size (L x W x H) m 9.23x2.68x2.23
Machine Weight ton 34
Water Requirement ℓ/min 8.3[170]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Clamping Unit
(2PLATE)		 Clamping Force ton 850/46
Opening Stroke mm 1250/2000
Min. Mold Height mm 550
Max. Mold Height mm 1300
Max. Mold Weight kg 11000
Space between tiebar (H x V) mm 1100x1100
Platen Size (H x V) mm 1630x1630
Ejector Force ton 27
Ejector Stroke mm 250
Clamping Unit
(2PLATE)		 Clamping Force ton 850/46
Opening Stroke mm 1250/2000
Min. Mold Height mm 550
Max. Mold Height mm 1300
Max. Mold Weight kg 11000
Space between tiebar (H x V) mm 1100x1100
Platen Size (H x V) mm 1630x1630
Ejector Force ton 27
Ejector Stroke mm 250
General
※HYBRID
Green color		 Heater Power kW 48.9
Pump Motor Power kW 97.5[110]
Total Wattage kW 147.9[160.1]
Oil Tank Capacity ℓ 960[1500]
Machine Size (L x W x H) m 10.35x2.88x2.44
Machine Weight ton 45
Water Requirement ℓ/min 98[220]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • • Shot weight = Shot size x material constant
  • • Total wattage = Heater power + pump motor power + system power.
  • • Water requirement is not considered mold cooling but considered only injection molding machine.
  • • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 1050
Item Unit A B
Screw Diameter mm 105 115
Shot Weight (PS) g 4097 4915
Shot Size cm³ 4503 5401
Injection Pressure kg/cm² 1721 1434
Injection Rate cm³/sec 864 1037
Screw Stroke mm 520
Plasticizing Capacity kg/hr 442 564
Screw Speed rpm 146
Clamping Unit
(2PLATE)		 Clamping Force ton 1050/62
Opening Stroke mm 1300/2000
Min. Mold Height mm 600
Max. Mold Height mm 1300
Max. Mold Weight kg 15000
Space between tiebar (H x V) mm 1300x1300
Platen Size (H x V) mm 1900x1900
Ejector Force ton 27
Ejector Stroke mm 250
General
※HYBRID
Green color		 Heater Power kW 48.9
Pump Motor Power kW 117.5[110]
Total Wattage kW 167.9[160.1]
Oil Tank Capacity ℓ 1040[1500]
Machine Size (L x W x H) m 11.09x3.24x2.52
Machine Weight ton 54
Water Requirement ℓ/min 118[220]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 1300
Item Unit A B
Screw Diameter mm 115 125
Shot Weight (PS) g 6144 7259
Shot Size cm³ 6751 7976
Injection Pressure kg/cm² 1812 1533
Injection Rate cm³/sec 969 1145
Screw Stroke mm 650
Plasticizing Capacity kg/hr 456 561
Screw Speed rpm 118
Clamping Unit
(2PLATE)		 Clamping Force ton 1300/90
Opening Stroke mm 1700/2300
Min. Mold Height mm 700
Max. Mold Height mm 1300
Max. Mold Weight kg 17000
Space between tiebar (H x V) mm 1410x1410
Platen Size (H x V) mm 2015x2015
Ejector Force ton 40
Ejector Stroke mm 300
General
※HYBRID
Green color		 Heater Power kW 64.6
Pump Motor Power kW 121[130]
Total Wattage kW 187.1[195.8]
Oil Tank Capacity ℓ 1205[2000]
Machine Size (L x W x H) m 11.75x3.53x2.71
Machine Weight ton 62
Water Requirement ℓ/min 121[260]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 1600
Item Unit A B
Screw Diameter mm 115 125
Shot Weight (PS) g 6144 7259
Shot Size cm³ 6751 7976
Injection Pressure kg/cm² 1812 1533
Injection Rate cm³/sec 969 1145
Screw Stroke mm 650
Plasticizing Capacity kg/hr 456 561
Screw Speed rpm 118
Clamping Unit
(2PLATE)		 Clamping Force ton 1600/110
Opening Stroke mm 1700/2450
Min. Mold Height mm 750
Max. Mold Height mm 1500
Max. Mold Weight kg 22500
Space between tiebar (H x V) mm 1600x1500
Platen Size (H x V) mm 2220x2120
Ejector Force ton 40
Ejector Stroke mm 300
General
※HYBRID
Green color		 Heater Power kW 64.6
Pump Motor Power kW 121[130]
Total Wattage kW 187.1[195.8]
Oil Tank Capacity ℓ 1205[2000]
Machine Size (L x W x H) m 12.69x3.82x2.86
Machine Weight ton 75
Water Requirement ℓ/min 121[260]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 2000
Item Unit A B
Screw Diameter mm 132 140
Shot Weight (PS) g 9340 10506
Shot Size cm³ 10263 11545
Injection Pressure kg/cm² 1700 1511
Injection Rate cm³/sec 1205 1355
Screw Stroke mm 750
Plasticizing Capacity kg/hr 684 786
Screw Speed rpm 117
Clamping Unit
(2PLATE)		 Clamping Force ton 2000/62
Opening Stroke mm 2400/3100
Min. Mold Height mm 800
Max. Mold Height mm 1500
Max. Mold Weight kg 25500
Space between tiebar (H x V) mm 1800x1600
Platen Size (H x V) mm 2450x2150
Ejector Force ton 40
Ejector Stroke mm 350
General
※HYBRID
Green color		 Heater Power kW 68
Pump Motor Power kW 146[150]
Total Wattage kW 215.5[219.2]
Oil Tank Capacity ℓ 1400[2500]
Machine Size (L x W x H) m 13.5x3.8x3.27
Machine Weight ton 110
Water Requirement ℓ/min 146[300]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 2500
Item Unit A B
Screw Diameter mm 140 150
Shot Weight (PS) g 11487 13186
Shot Size cm³ 12622 14490
Injection Pressure kg/cm² 1730 1507
Injection Rate cm³/sec 1271 1459
Screw Stroke mm 820
Plasticizing Capacity kg/hr 702 822
Screw Speed rpm 104
Clamping Unit
(2PLATE)		 Clamping Force ton 2500/110
Opening Stroke mm 2700/3600
Min. Mold Height mm 900
Max. Mold Height mm 1800
Max. Mold Weight kg 37000
Space between tiebar (H x V) mm 2050x1700
Platen Size (H x V) mm 2710x2360
Ejector Force ton 40
Ejector Stroke mm 350
General
※HYBRID
Green color		 Heater Power kW 81
Pump Motor Power kW 156[165]
Total Wattage kW 238.5[247.2]
Oil Tank Capacity ℓ 1500[2800]
Machine Size (L x W x H) m 15x4.2x3.48
Machine Weight ton 130
Water Requirement ℓ/min 156[330]
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 3000
Item Unit A B
Screw Diameter mm 160 170
Shot Weight (PS) g 16467 18590
Shot Size cm³ 18095 20428
Injection Pressure kg/cm² 1744 1545
Injection Rate cm³/sec 1471 1661
Screw Stroke mm 900
Plasticizing Capacity kg/hr 853 982
Screw Speed rpm 93
Clamping Unit
(2PLATE)		 Clamping Force ton 3000/180
Opening Stroke mm 2700/3700
Min. Mold Height mm 1000
Max. Mold Height mm 2000
Max. Mold Weight kg 51000
Space between tiebar (H x V) mm 2100x1800
Platen Size (H x V) mm 3000x2650
Ejector Force ton 50
Ejector Stroke mm 400
General
※HYBRID
Green color		 Heater Power kW 96
Pump Motor Power kW 205
Total Wattage kW 302.2
Oil Tank Capacity ℓ 3500
Machine Size (L x W x H) m 17x5x4
Machine Weight ton 195
Water Requirement ℓ/min 410
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 4000
Item Unit A B
Screw Diameter mm 170 190
Shot Weight (PS) g 20242 25285
Shot Size cm³ 22244 27785
Injection Pressure kg/cm² 1652 1322
Injection Rate cm³/sec 1684 2104
Screw Stroke mm 980
Plasticizing Capacity kg/hr 952 1235
Screw Speed rpm 90
Clamping Unit
(2PLATE)		 Clamping Force ton 4000/180
Opening Stroke mm 2700/3700
Min. Mold Height mm 1000
Max. Mold Height mm 2000
Max. Mold Weight kg 60500
Space between tiebar (H x V) mm 2300x2000
Platen Size (H x V) mm 3250x2900
Ejector Force ton 60
Ejector Stroke mm 400
General
※HYBRID
Green color		 Heater Power kW 115
Pump Motor Power kW 225
Total Wattage kW 341.2
Oil Tank Capacity ℓ 4000
Machine Size (L x W x H) m 20x5.2x4.5
Machine Weight ton 230
Water Requirement ℓ/min 450
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.
Injection Unit Model 5000
Item Unit A B
Screw Diameter mm 200 220
Shot Weight (PS) g 30018 36322
Shot Size cm³ 32986 39913
Injection Pressure kg/cm² 1573 1300
Injection Rate cm³/sec 1769 2140
Screw Stroke mm 1050
Plasticizing Capacity kg/hr 1104 1360
Screw Speed rpm 71
Clamping Unit
(2PLATE)		 Clamping Force ton 5000/200
Opening Stroke mm 2700/3700
Min. Mold Height mm 1200
Max. Mold Height mm 2200
Max. Mold Weight kg 75000
Space between tiebar (H x V) mm 2400x2100
Platen Size (H x V) mm 3450x3100
Ejector Force ton 73
Ejector Stroke mm 460
General
※HYBRID
Green color		 Heater Power kW 150
Pump Motor Power kW 225
Total Wattage kW 376.2
Oil Tank Capacity ℓ 4500
Machine Size (L x W x H) m 22x5.8x4.9
Machine Weight ton 300
Water Requirement ℓ/min 450
  • Shot Size = Cross sectional area of screw diameter x screw stroke
  • Shot weight = Shot size x material constant
  • Total wattage = Heater power + pump motor power + system power.
  • Water requirement is not considered mold cooling but considered only injection molding machine.
  • Above data can be changed according to the manufacturer's R&D plan without notice to the customer side.

What is MuCell?

  • A technical process to create evenly distributed and uniformly sized microscopic cells throughout a polymer by diffusing supercritical fluids(SCF) such as nitrogen or carbon dioxide gases
  • MuCell is a licensed technology by Trexel Inc. in USA developed by MIT (Massachusetts Institute of Technology)
  • MuCell reduces operating costs by 20-30% compared to conventional injection molding process
  • MuCell technology is applicable to injection molding and extrusion processes, and is considered the next generation technology, replacing gas injection

Features of MuCell Processing Technology

Save production costs

  • 17% weight reduction
  • 20 ~ 50% saving cycle time, without back pressure process
  • 30 ~ 80% decreasing clamping force by improvement of material fluidity
  • Max. 60% decreasing viscosity of polymer material
  • 30 ~ 50% decreasing injection pressure

Reinforcement of material physical properties

  • Improvement of impact strength, vibration proof and heat reserve by microcellular forming process
  • Increasing compression intensity and tension compared to existing forming products

Save environmental expenses

  • Possible to recycle using CO2 and N2 gases
  • Enormous reduction of electric consumption through minimization of machine capacity